欧美黑人3p-欧美黑大硬粗免费视频-欧美黑大粗-欧美黑粗特黄午夜大片-欧美黑白配性xxxxx-欧美黑b

Disc brake History

 

Early experiments

Development of disc brakes began in England in the 1890s.

The first caliper-type automobile disc brake was patented by Frederick William Lanchester in his Birmingham factory in 1902 and used successfully on Lanchester cars. However, the limited choice of metals in this period meant that he had to use copper as the braking medium acting on the disc. The poor state of the roads at this time, no more than dusty, rough tracks, meant the copper wore quickly making the system impractical.

The American Crosley Hot Shot is often given credit for the first production disc brakes. For six months in 1950, Crosley built a car with these brakes, then returned to drum brakes. Lack of sufficient research caused reliability problems, such as sticking and corrosion, especially in regions using salt on winter roads. Drum brake conversions for Hot Shots were quite popular. The Crosley disc was a Goodyear development, a caliper type with ventilated disc, originally designed for aircraft applications.

Chrysler developed a unique braking system, offered from 1949 to 1953. Instead of the disc with caliper squeezing on it, this system used twin expanding discs that rubbed against the inner surface of a cast-iron brake drum, which doubled as the brake housing. The discs spread apart to create friction against the inner drum surface through the action of standard wheel cylinders. Because of the expense, the brakes were only standard on the Chrysler Crown and the Town and Country Newport in 1950. They were optional, however, on other Chryslers, priced around $400, at a time when an entire Crosley Hot Shot retailed for $935. This four-wheel disc brake system was built by Auto Specialties Manufacturing Company (Ausco) of St. Joseph, Michigan, under patents of inventor H.L. Lambert, and was first tested on a 1939 Plymouth. Chrysler discs were "self energizing," in that some of the braking energy itself contributed to the braking effort. This was accomplished by small balls set into oval holes leading to the brake surface.When the disc made initial contact with the friction surface, the balls would be forced up the holes forcing the discs further apart and augmenting the braking energy. This made for lighter braking pressure than with calipers, avoided brake fade, promoted cooler running, and provided one-third more friction surface than standard Chrysler twelve-inch drums. Today's owners consider the Ausco-Lambert very reliable and powerful, but admit its grabbiness and sensitivity.

Racing breakthrough

Reliable caliper-type disc brakes first appeared in 1953 on the Jaguar C-Type racing car. These brakes helped the company to win the 1953 24 Hours of Le Mans,developed in the UK by Dunlop. That same year, the aluminum bodied Austin-Healey 100S, of which 50 were made, was the first car sold to the public to have disc brakes, fitted to all 4 wheels.

Mass production

The first mass production use of the modern disc brake was in 1955, on the Citroën DS, which featured caliper-type front disc brakes among its many innovations. These discs were mounted inboard near the transmission, and were powered by the vehicle's central hydraulic system. This model went on to sell 1.5 million units over 20 years with the same brake setup.

The Jensen 541, with four-wheel disc brakes, followed in 1956.

Disc brakes were most popular on sports cars when they were first introduced, since these vehicles are more demanding about brake performance. Discs have now become the more common form in most passenger vehicles, although many (particularly light weight vehicles) use drum brakes on the rear wheels to keep costs and weight down as well as to simplify the provisions for a parking brake. As the front brakes perform most of the braking effort, this can be a reasonable compromise.

Many early implementations for automobiles located the brakes on the inboard side of the driveshaft, near the differential, while most brakes today are located inside the wheels. An inboard location reduces the unsprung weight and eliminates a source of heat transfer to the tires.

Historically, brake discs were manufactured throughout the world with a strong concentration in Europe and America. Between 1989 and 2005, manufacturing of brake discs migrated predominantly to China.

2016-09-27 23:56:04
主站蜘蛛池模板: 一区二区不卡视频在线观看 | 天天操天天干天天爽 | 国产啪在线 | 日韩三级不卡 | 不卡视频在线 | 欧美洲视频在线观看 | 欧美一道本 | 一道久久爱综合久久爱 | 欧美视频日韩视频 | 久久综合中文字幕一区二区 | 91久久偷偷做嫩草影院免费看 | 国产三级在线视频观看 | 国产欧美一区二区三区观看 | 欧美日韩免费一区二区三区 | 日本免费毛片在线高清看 | 精品国产一级在线观看 | 日本精品一区二区三区在线 | 九一精品国产 | 国产在线视频你懂得 | 日韩免费在线播放 | 在线观看www日本免费网站 | 欧美精品99毛片免费高清观看 | 久久精品国产亚洲a不卡 | 亚洲欧美日韩久久精品第一区 | 三级国产短视频在线观看 | 精品久久一区二区 | 国产免费人视频在线观看免费 | 国产一级做a爱片久久片 | 久操福利在线 | 久久久午夜精品理论片 | 亚洲综合三区 | 欧美日韩国产码高清综合人成 | 99久久99久久| 国产女女视屏免费 | 日韩a级在线 | 日韩美女在线视频 | 日本一区高清视频 | 亚洲综合偷自成人网第页 | 亚洲视频在线观看网站 | 午夜视频福利 | 日韩 视频在线播放 |